aaronpk

[LQSession userID]: unrecognized selector sent to instance
I'm not quite sure why you are having this problem. I would suggest importing the latest SDK files from https://github.com/geoloqi/Geoloqi-iPhone-SDK and doing a Clean, then try rebuilding. If you would like, we can take a look at the code. The…

Comment by aaronpk October 2012 permalink
500 - Internal Server
Can you give me the layer ID and let me know what parameters you are using with place/nearby so I can take a look at a few things?

Comment by aaronpk October 2012 permalink
500 - Internal Server
We just deployed a change which caused a few errors in certain place/update and place/create calls. Please try again and it should be fixed now.

Comment by aaronpk September 2012 permalink
Another plea for assistance - No triggers, no broadcast
Hi Bruce, It sounds like you're receiving the push notification through the Geoloqi application. This is probably because you logged in with the same Geoloqi account from our app. The real problem is that this means something about the push ce…

Comment by aaronpk September 2012 permalink
What is the length limit of a Geoloqi message sent over APS (Push)?
Sorry, the Geoloqi API does not currently support setting the badge number. We may add this in the near future, however.

Comment by aaronpk September 2012 permalink
"Sorry, the page you requested was not found"
Thanks! It's fixed now.

Comment by aaronpk September 2012 permalink
Layers
Unfortunately there is no way around the limit as it's enforced by Apple's push notification service. The maximum length for a message is 256 bytes, but that includes all the metadata for the message such as which sound to play and badge n…

Comment by aaronpk September 2012 permalink
Trigger + Layer vs. Trigger + Place
It sounds like what you need is to be able to use message/broadcast to send an alert to anyone in an area. If you set up an empty layer and have all users subscribe to it, you can use that layer ID for sending the broadcast message, since you can sp…

Comment by aaronpk September 2012 permalink
Push Notification Setup on Android using Titanium module
If you have specified both a pushSender and pushAccount, it will only register the C2DM token. If you have specified only the pushSender for GCM and are still having trouble, I can investigate your account if you send an email to support@geoloqi.com…

Comment by aaronpk September 2012 permalink
Layer Create Response Question
It sounds like the problem is that there was never any location data collected for the users, so the system doesn't know where they are. Here is what you should do:As your application account, create Layer A. You'll do this only one time. …

Comment by aaronpk September 2012 permalink
Listing all users currently located in a give place
We don't have an API method to do this for a specific place, but there is one that can tell you which users are at any place on a layer. Check out the documentation for layer/users/:id. The response contains two objects, "users" and &…

Comment by aaronpk September 2012 permalink
What is the length limit of a Geoloqi message sent over APS (Push)?
Messages sent via Apple's push notification service (APNS or APS) have a maximum payload size of 256 bytes. However, the message is actually sent as a JSON blob including some other metadata such as text to display on the button, which sound to…

Comment by aaronpk September 2012 permalink
Another plea for assistance - No triggers, no broadcast
Hi Bruce, a couple things that will help: If you're using the layer/place/trigger methods, you can simplify the setup of those as follows:Create a layer with just the name (lat,lng,radius is not needed for the layer for this)Create the place wi…

Comment by aaronpk September 2012 permalink
More: Group API calls from the iOS SDK? Authorization: the sequel
You'll see this error if the user trying to send the message is not part of the group or didn't create it. Only the creator of the group or anyone who's joined the group as "publishing" can do this. If you made the group wit…

Comment by aaronpk September 2012 permalink
using iOS SDK with API call requiring access token (OAuth)
Actually the SDK handles this automatically. Here is a simple example of making an API call with the access token: https://github.com/geoloqi/Geoloqi-iPhone-SDK/blob/master/TrackerSample/TrackerSample/TrackerSampleViewController.m#L141 When you use …

Comment by aaronpk September 2012 permalink
Group API calls from the iOS SDK? Token?
Yep, sorry about the confusion!

Comment by aaronpk September 2012 permalink
Group API calls from the iOS SDK? Token?
Looks like you have an extra ":" in the URL. Try this instead: @"/group/info/ab4NEKC0p"

Comment by aaronpk September 2012 permalink
Android Titanium Module Push Notification
Please read our push notification configuration guide for Android: http://developers.geoloqi.com/android/push-notifications There are a few things you need to do:Configure a Google GCM account and enter your API key into the Geoloqi developer siteM…

Comment by aaronpk September 2012 permalink
[LQSession userID]: unrecognized selector sent to instance
Please make sure you are using the latest version of the SDK. I just double checked and a fresh download of the SDK does not have this problem.

Comment by aaronpk August 2012 permalink
layer/place not triggering
Either way you create the account is fine, it just depends on whether you want the users to be able to log back in to an account with a password. We see a lot of people just use the createAnonymous method because their users don't even necessar…

Comment by aaronpk August 2012 permalink
Layers
Once your layer is finished, we can mark it "featured" so that it will show up in the Geonotes app near a specific area. Please send us an email to support @ geoloqi.com when your layer is ready, and we can discuss further. Thanks!

Comment by aaronpk August 2012 permalink
layer/place not triggering
Your example of setting the device_id for a user is correct. If you look at account/profile you will see "device_id" in the "extra" object.

Comment by aaronpk August 2012 permalink
layer/place not triggering
Make sure the user has subscribed to the layer you created. If you're not seeing anything in the trigger/nearby call it could be because the user isn't subscribed. Also, "distance=5" is very small, try something larger like 150 m…

Comment by aaronpk August 2012 permalink
Disable GPS
You can set the profile of the iPhone SDK to "off" whenever you need which will disable location services. For example, you could set up the App Delegate's "applicationDidEnterBackground:" method to turn off location updates…

Comment by aaronpk August 2012 permalink
iPhone4 device can not receive message send notification.
If you see "devices = 1" when running message/send then it did attempt to send a push notification. Please make sure you uploaded your push notification certificate to the website following this guide: http://developers.geoloqi.com/ios/pu…

Comment by aaronpk August 2012 permalink
Switch tracking modes when entering geofence
Hi Pascal, Currently we do not have the hooks on the iOS side available to do this, however this has come up a number of times as a feature request. We will be adding this feature in a future version of the SDK. Thanks! Aaron

Comment by aaronpk July 2012 permalink
When I set trackerprofile mode as ROUGH , It dosenot return location/last?
I believe this is because location/last will not return "inaccurate" points, which you typically get with the Rough profile. A workaround is to use location/history?count=1&accuracy=5000

Comment by aaronpk July 2012 permalink
connecting to realtime streaming server with socket.io on iOS
It could be that your users are not joined to the group? Make sure you've run the group/join/:token method for the users you want to show up in the group's stream. The link you found is the experimental streaming HTTP service, which is no…

Comment by aaronpk July 2012 permalink
Feature Requests
This one is purely for ease of development, but it would be a great help - prebuilt classes for the api response objects (for ios and android sdk). Its quite a time-consuming process going through the api documentation and building these response o…

Comment by aaronpk July 2012 permalink
Invalid Client Credentials
The user/list method requires your application's client ID and secret to be included in the request. Make sure you've put the client ID and secret in your PHP code as well.

Comment by aaronpk July 2012 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: aaronpk
Email: aaronatpareckidotcom
Joined: November 2011
Visits: 1
Last Active: 3:02PM
Roles: Administrator, Moderator